Software Updates for Registered Users

Update history

Latest Windows version 7 update (especially recommended for users in Belgium, France, Guam, Hong Kong, Ireland, Malaysia, Mexico, Netherlands, Portugal ,and the UK)

Latest Windows version 6 update

Latest Macintosh version 7

Latest Macintosh version 6 update

TimeWise for Windows updaters (listed newest to oldest)

TimeWise for Windows and TimeWise Light for Windows updater to version 7, release P1 (January 20/2009, ~700KB)

This updater updates all versions of TimeWise for Windows (including TimeWise Light) release E1 and later, improving features and fixing problems reported by our users. You must have TimeWise 7 release E1 or later or TimeWise Light 7 release E1 or later installed for the update to work. If you wish to upgrade from version 6 or early beta releases of version 7, see our upgrade page.

How to install the updater: After backing up your entire TimeWise folder, download the updater to your TimeWise folder and double-click on it, agreeing when asked to replace any existing files with the same names. (If you are on a network, you may have to remove the read-only attributes from the following files before running the updater and then restore them to read-only manually afterwards: *.EXE, *.LB?, *.FR?, *.FPW, *.DLL, *.HLP .) Then, after launching TimeWise for the first time, run the First Aid command from the Tools menu before performing any other functions in TimeWise.

TimeWise for Windows and TimeWise Light for Windows updater to version 7, release N2 (May 30/2006, ~670KB)

This updater updates all versions of TimeWise Light 7 for Windows release E1 and later, and all versions of TimeWise 7 for Windows release E1 and later, improving features and fixing problems reported by our users. You must have TimeWise 7 release E1 or later or TimeWise Light 7 release E1 or later installed for the update to work. If you wish to upgrade from version 6 or early beta releases of version 7, see our upgrade page.

How to install the updater: After backing up your entire TimeWise folder, download the updater to your TimeWise folder and double-click on it, agreeing when asked to replace any existing files with the same names. If you are on a network, you may have to remove the read-only attributes from the following files before running the updater and then restore them to read-only manually afterwards: *.EXE, *.LB?, *.FR?, *.FPW, *.DLL, *.HLP .

TimeWise for Windows and TimeWise Light for Windows updater to version 7, release M10 (July 7/2004, ~650KB)

This updater updates all versions of TimeWise Light 7 for Windows, release E1 and later and all versions of TimeWise 7 for Windows release E1 and later, improving features and fixing problems reported by our users. You must have TimeWise 7 release E1 or later or TimeWise Light 7 release E1 or later installed for the update to work. If you wish to upgrade from version 6 or early beta releases of version 7, see our upgrade page.

How to install the updater: After backing up your entire TimeWise folder, download the updater to your TimeWise folder and double-click on it, agreeing when asked to replace any existing files with the same names. If you are on a network, you may have to remove the read-only attributes from the following files before running the updater and then restore them to read-only manually afterwards: *.EXE, *.LB?, *.FR?, *.FPW, *.DLL, *.HLP .

TimeWise for Windows and TimeWise Light for Windows updater to version 7, release J3 (January 1/2003, ~650KB)

This updater updates all versions of TimeWise Light 7 for Windows, release E1 and later and all versions of TimeWise 7 for Windows release E1 or later, improving features and fixing problems reported by our users. You must have TimeWise 7 release E1 or later or TimeWise Light 7 release E1 or later installed for the update to work. If you wish to upgrade from version 6 or early beta releases of version 7, see our upgrade page.

Note: If you are installing over an existing installation of TimeWise that did not have a region profile that is now available in TimeWise 7, e-mail support@timewise.net for instructions on how to change to the new region profile for your region.

TimeWise for Windows and TimeWise Light for Windows updater to version 7, release D5 (posted July 12/2001, ~600KB)

This updater updates all versions of TimeWise Light 6 for Windows, release D4 and later and all versions of TimeWise 6 Light for Windows release D4 and all versions to the last pre-release beta version of version 7, improving features and fixing problems reported by our users. You must have TimeWise 6 release D4 or later or TimeWise Light 6 release D4 or later installed for the update to work. If you wish to upgrade from version 5 to version 6, see our upgrade page. If you already have version 6 but a release earlier than D4, then install the updater to 6D4 first, then install this updater.

International users: If you are installing this update to make available to you a region profile not previously available, and you have already installed and are using TimeWise, you must follow these steps in order to force TimeWise to ask you to choose your region profile again (thus letting you choose the one you want): 1. Uninstall TimeWise. 2. Reinstall TimeWise but don't launch yet. 3. Install this updater. 4. Launch TimeWise and select the region profile you want when asked. (If this procedure is unrealistic because you have already been working in TimeWise and don't want to lose your data, email us at support@timewise.net and we will tell you how to change your region profile without losing any data.)

Cross-platform users beware!: If you are running both TimeWise for Windows and TimeWise for Macintosh with shared data, you must keep the release letter in sync across both platforms... which means that, for example,  if you are running release 6A on one platform, you must be running release 6A on the other platform in order that the data remains cross-platform compatible. You can mix releases where the last digit differs: for instance, you can mix 6A3 with 6A6, but NOT 6A3 with 6B3.
    Currently, the best cross-platform mix is TimeWise for Macintosh release 7D5 and TimeWise for Windows 7D5.

How to install the updater: After backing up your entire TimeWise folder, download the updater to your TimeWise folder and double-click on it, agreeing to replace any existing files with the same names. If you are on a network, you will have to remove the read-only attributes from the following files before running the updater and then restore them to read-only manually afterwards: *.EXE, *.LB?, *.FR?, *.FPW, *.ESL, *.HLP .

TimeWise for Windows 6 and TimeWise Light for Windows 6 updater to version 6D4 (posted May 26/1999, 1600KB)

This updater updates all versions of TimeWise Light 6 for Windows and all versions of TimeWise 6 for Windows onward to the most recent beta version, improving features and fixing problems reported by our users. You must have TimeWise 6 or TimeWise Light 6 for Windows installed for the update to work. If you wish to upgrade from version 5 to version 6, see our upgrade page.

Please note that this particular updater makes major changes to how client and vendor contact information is stored. While you will find major improvements in the amount of information you can store about each contact and no limit to how many contacts you can have for each client and vendor, it is possible that you may have to retype a bit of information about your contacts in some rare instances.

Important note for users already running a version 6D1, 6D2, 6D3, or 6D4: There is no reason you would likely every have to, however if for some rare reason you find yourself applying this 6D4 updater to an installation that is already upgraded to 6D, then take this precaution: when extracting the files, say No to overwriting an existing copy of the file contacts.dbf  if asked (that's the only issue).

Cross-platform users beware!: If you are running both TimeWise for Windows and TimeWise for Macintosh with shared data, you must keep the release letter in sync across both platforms... which means that, for example,  if you are running release 6A on one platform, you must be running release 6A on the other platform in order that the data remains cross-platform compatible. You can mix releases where the last digit differs: for instance, you can mix 6A3 with 6A6, but NOT 6A3 with 6B3.
    Currently, the best cross-platform mix for version 6 users is TimeWise for Macintosh release 6E1 and TimeWise for Windows 6D4 (which we know sounds like it breaks the above rule, but is in fact just fine).

How to install the updater: After backing up your entire TimeWise folder, download the updater into your TimeWise folder and double-click on it, agreeing to replace any existing files with the same names. If you are on a network, you will have to remove the read-only attributes from the following files before running the updater and then restore them to read-only manually afterwards: *.EXE, *.LB?, *.FR?, *.FPW, *.ESL, *.HLP .

You must upgrade from version 5 to version 6 in order for TimeWise for Windows to be Year 2000 compliant.
For more information on upgrading, go to http://www.davidberman.com/timewise/upgrade.htm .

If you have a version of TimeWise for Windows earlier than 5G1 installed, apply the updater below, TWWPATCH.EXE, before upgrading to version 6.

This updater updates all previous versions of TimeWise for Windows to version 5G1, fixing a number of bugs reported by our users. You must have a registered license to TimeWise for Windows installed for this updater to work. To use the updater, follow the same instructions as shown above for the most recent updater to TimeWise for Windows.
 

Macintosh updaters (listed newest to oldest)

TimeWise for Macintosh updater to beta version 7 release J2 (January 2003) (~3.5 Meg)

This updater updates TimeWise for Macintosh version 6 release E1 or later to the most recent public beta release, improving features and fixing a number of bugs reported by our beta sites, and hopefully works for OS9.1 and later... please tell us what results you get.

If you are currently using release 6B8 or earlier, you must update to use TimeWise beyond December 31/1999, as the beta releases expire then. (if you are updating from a release earlier that version 6E1, you must first update to release 6E1, before installing this updater... the earlier updater is available further below on this page).

Please note that if you are updating from a version earlier that 6G4, that this particular updater makes major changes to how client and vendor contact information is stored. While you will find major improvements in the amount of information you can store about each contact and no limit to how many contacts you can have for each client and vendor, it is possible that you may have to retype a bit of information about your contacts in some rare instances.

You must have a registered license to TimeWise for Macintosh installed to use the updater. To install the updater, first make sure all users are out of TimeWise, then backup your entire TimeWise folder (just in case something goes wrong). Then simply download the updater into the Resource folder of your TimeWise folder folder and double-click on the downloaded file (which should cause a dozen or so files to get put in your Resource folder), agreeing to replace any existing files with the same names.

Cross-platform users beware: If you are running both TimeWise for Windows and TimeWise for Macintosh with shared data, you must typically keep the release letter in sync across both platforms... which means that, for example,  if you are running release 6A on one platform, you must be running release 6A on the other platform in order that the data remains cross-platform compatible. You can mix releases where the last digit differs: for instance, you can mix 6A3 with 6A6, but NOT 6A3 with 6B3.
    Currently, the best cross-platform mix is TimeWise for Macintosh release 7D5 and TimeWise for Windows 7D5.

TimeWise for Macintosh updater to version 7, release D5 (April/2001) (750KB)

This updater updates TimeWise for Macintosh version 6 release E1 or later to the most recent release, improving features and fixing a number of bugs.

If you are running release 6B8 or earlier, you must update to use TimeWise beyond December 31/1999, as the beta releases expires then. (if you are updating from a release earlier that version 6E1, you must first update to release 6E1, before installing this updater... the earlier updater is available further below on this page).

Please note that if you are updating from a version earlier that 6G4, that this particular updater makes major changes to how client and vendor contact information is stored. While you will find major improvements in the amount of information you can store about each contact and no limit to how many contacts you can have for each client and vendor, it is possible that you may have to retype a bit of information about your contacts in some rare instances.

You must have a registered license to TimeWise for Macintosh installed to use the updater. To install the updater, first make sure all users are out of TimeWise, then backup your entire TimeWise folder (just in case something goes wrong). Then simply download the updater into the Resource folder of your TimeWise folder folder and double-click on the downloaded file (which should cause a dozen or so files to get put in your Resource folder), agreeing to replace any existing files with the same names.

If you are running TimeWise for Macintosh cross-platform with TimeWise for Windows, install the updater to TimeWise for Macintosh release 7D5, and run it concurrently with TimeWise for Windows release 7D5 (for updater, see above).

Cross-platform users beware: If you are running both TimeWise for Windows and TimeWise for Macintosh with shared data, you must typically keep the release letter in sync across both platforms... which means that, for example,  if you are running release 6A on one platform, you must be running release 6A on the other platform in order that the data remains cross-platform compatible. You can mix releases where the last digit differs: for instance, you can mix 6A3 with 6A6, but NOT 6A3 with 6B3.   

We make earlier Macintosh files available as hqx (binhex) files. We use the BinHex 4.0 standard which is supported by the Stuffit Expander. Get Stuff-it Expander, if you don't have it or an equivalent product installed already.

TimeWise for Macintosh updater to release 6G4 (October/1999) (750KB)

This updater updates TimeWise for Macintosh version 6 release B8 or later to the most recent release, improving features and fixing a number of bugs reported by our beta sites.

If you are running release 6B8 or earlier, you must update your software in order to be able to use TimeWise beyond December 31/1999, as the beta releases expires then. (if you are updating from a release earlier that version 6E1, you must first update to release 6E1, before installing this updater... the earlier updater is available further below on this page).

Please note that this particular updater makes major changes to how client and vendor contact information is stored. While you will find major improvements in the amount of information you can store about each contact and no limit to how many contacts you can have for each client and vendor, it is possible that you may have to retype a bit of information about your contacts in some rare instances.

You must have a registered license to TimeWise for Macintosh installed to use the updater. To install the updater, first make sure all users are out of TimeWise, then backup your entire TimeWise folder (just in case something goes wrong). Then simply download the updater into the Resource folder of your TimeWise folder folder and double-click on the downloaded file (which should cause a dozen or so files to get put in your Resource folder), agreeing to replace any existing files with the same names.

If you are running TimeWise for Macintosh cross-platform with TimeWise for Windows, install the updater to TimeWise for Macintosh release 6E1 instead (for updater, see below), and run it concurrently with TimeWise for Windows release 6D4 (for updater, see above).

Cross-platform users beware: If you are running both TimeWise for Windows and TimeWise for Macintosh with shared data, you must typically keep the release letter in sync across both platforms... which means that, for example,  if you are running release 6A on one platform, you must be running release 6A on the other platform in order that the data remains cross-platform compatible. You can mix releases where the last digit differs: for instance, you can mix 6A3 with 6A6, but NOT 6A3 with 6B3.
    The best cross-platform mix for version 6 users is TimeWise for Macintosh release 6E1 and TimeWise for Windows 6D4 (which we know sounds like it breaks the above rule, but is in fact just fine).

We make Macintosh files available as hqx (binhex) files. We use the BinHex 4.0 standard which is supported by the Stuffit Expander. If you are using Netscape 2.0 or later, you likely already have Stuffit Expander installed and set up to automatically help you out. Get Stuff-it Expander, if you don't have it already.

This updater updates TimeWise for Macintosh version 6 release B8 or later to the most recent cross-platform compatible release, improving features and fixing a number of bugs reported by our beta sites. If you are running beta release 6B8 or earlier, you must update in order to be able to use TimeWise beyond December 31/1999, as the beta releases expires then. (if you are updating from a release earlier that version 6B8, you must first update to release 6B8, before installing this updater... the earlier updater is available further below on this page). You must have a registered license to TimeWise for Macintosh installed to use the updater. To install the updater, first make sure all users are out of TimeWise, then backup your entire TimeWise folder (just in case something goes wrong). Then simply download the updater into the Resource folder of your TimeWise folder folder and double-click on the downloaded file (which should cause a dozen or so files to get put in your Resource folder), agreeing to replace any existing files with the same names.

Cross-platform users: If you are running both TimeWise for Windows and TimeWise for Macintosh with shared data, you must typically keep the release letter in sync across both platforms... which means that, for example,  if you are running release 6A on one platform, you must be running release 6A on the other platform in order that the data remains cross-platform compatible. You can mix releases where the last digit differs: for instance, you can mix 6A3 with 6A6, but NOT 6A3 with 6B3.
    The best cross-platform mix for version 6 users is TimeWise for Macintosh release 6E1 and TimeWise for Windows 6D4 (which we know sounds like it breaks the above rule, but is in fact just fine).

We make Macintosh files available as hqx (binhex) files. We use the BinHex 4.0 standard which is supported by the Stuffit Expander. If you are using Netscape 2.0 or later, you likely already have Stuffit Expander installed and set up to automatically help you out. Get Stuff-it Expander, if you don't have it already.

This updater updates all earlier releases of TimeWise for Macintosh to version 6, release B8. You must have a registered license to TimeWise for Macintosh installed to use the updater. To install the updater, first backup your entire TimeWise folder (just in case something goes wrong). Then simply download the updater into the Resource folder of your TimeWise folder folder and double-click on the downloaded file, agreeing to replace any existing files with the same names.

We make Macintosh files available as hqx (binhex) files. We use the BinHex 4.0 standard which is supported by the Stuffit Expander. If you are using Netscape 2.0 or later, you likely already have Stuffit Expander installed and set up to automatically help you out. Get Stuff-it Expander, if you don't have it already.
 

Recent update history (in reverse chronological order)

These are the major improvements made in recent updates. You only need install the latest updater to get the improvements:

Version 7:

Release 7P1 (Windows, January 2009)
- improved Post Code implementation for addresses in UK
- fix bug that could cause "fixed "variable 'FNAME' is not found" message to appear when printing client or vendor labels with certain combinations of choices

Release 7N2 (Windows, May 2006)
- region profiles added for St. Lucia, St.Kitts, Antigua, Grenada, St. Vincent
- "Existing employee with same nickname as existing user" no longer misses employees added during in the current TimeWise session
- Shipping Account added to client profiles
- Invoice Notes added to Jobs
- Fax Memo removed from Notes
- Director-only security windows now specifies that it is for Director only
- bug fixed that could cause crash when setting Preferences for proposals
- fixed bug (introduced in 7M9) that could cause some downloads to wrongly claim expiry
- bug fixed in recognition when a Client ID happened to be within a job number
- added recurring jobs to invoice batch
- TimeTo now correctly ignores blank rows in MYOB export
- Australia only: further improvements to MYOB export for Australians
- United Kingdom only: fixed possible incorrect post code in Employees properties
- TimeTool for Windows enabled

Release 7M10 (Windows: July 2004)
- region profile added for Mexico
- improvement in date format and Business Number for Australia
- time categories and item categories gain preference to designate if category appears on charge screen
- job title expanded from 80 to 118 characters, with option to expand to 255 characters through database adjustment (TimeTool™ required)
- client profile Rates task overrides increased to 25
- recurring jobs now present the job ticket of the new job and append source job number to job title
- improvements to My Job Lists command
- minor improvements to behaviour of linked item charges and timer charges
- improved network delay for Timesheets command
- change charge category hourly rate for unlinked time charges
- allow four decimal places in item charge total value
- employee profile gains permission inheritance and efficiency factors inheritance, efficiency factors now forbid time entry if 0%
- employee profile gains option for user-configurable expansion of First Names and Last Name field to up to 78 characters each (TimeTool™ required)
- small improvements to field labelling in employee profile, incorporation of e-mail address
- minor improvements to security profile
- First Aid command timing accuracy improved
- improved cut and paste in all Notes windows
- change to hr:min display in Charge Category Report, Edit/Delete Charge, Timesheets, and Production Efficiency Report
- various improvements to reports (especially Production Efficiency Report, Employee Activity Reports, Work in Process Report) and scripting
- various small bug fixes

Release 7J3 (Windows: January 2004)
- region profiles added for Brazil, Jordan, Malaysia, enhanced for some regions in Canada
- linked charges gain linked item charges get edited when corresponding time charge edited
- List Time Entries report gains running timer charges only option
- Recurring Jobs now offered even if more than one job in progress for client
- client profile Accounting ID expanded from 8 to 20 characters
- many features renamed for clarity as a result of usability testing:
- New Session Becomes Change User, Retainer/Tab becomes Recurring, Access -> User (Power, Standard, Restricted), Rights -> Permissions, Specific Rights -> Permissions, New Session -> Change User, Diary / Calendar -> Calendar/Diary, Job Number List -> Jobs in Progress (by job number), Due Date Order List -> Jobs in Progress (by due date), Intradepartment List -> Jobs in Progress (by department), Completed Jobs List -> Completed Jobs (not invoiced), Retainers List -> Recurring Jobs in Progress, Memorized Job lists -> My Job Lists, Keyword List -> Search for Jobs (by keyword), Item Charge -> Item Charge / Order , View -> Job Reports, Update Ticket -> Job Ticket Properties, Analyze -> Analyze Job, Task Report -> Time Activity (by category) Report, Charge Authorization Report -> Charge Category By Job Report, Invoice Summary Report -> Invoice and Sales Tax Report, Client Sales Report -> Sales Report (by client),Work In Progress Report -> Work in Process Report, Quotation -> Quote, List Time Entries -> Time Charge Report, Setup | Tasks -> Setup | Time Categories, Setup | Items -> Item Categories (and Groups), Next Number -> Next Job Number, Unlock -> Unlock Licenses, "current job" -> "selected job", "retainer job" -> "recurring job"
- 32-bit engine installed
- item categories description field expands from 27 to 28 characters
- employee profile gains Position and one other field
- item overrides expand from 15 to 41 categories
- time category description fields expand from 25 to 70 characters
- employee efficiency factors now work for any time category
- invoicing gains interim invoicing features and many new invoice detail options
- client profile rates system gets four demical places, Clients|Rates gets 4-digit price overrides
- client profiles gain Incentive subsystem
- added Import Client Profiles command
- time charges gain better logic for charges that go past midnight
- time and item categories gain alternate description
- item charge total charges gain two more decimal places
- security profiles now include "Edit/Delete Charge, Post Charges to Jobs Not In Progress"
- employee profiles gain title field
- eliminated network delay on Time Charge edit in Timesheets command
- various bug fixes
- various small improvements to many reports (Task Report renamed Production Efficiency Report)
- default support of Euro symbol
- Release 7D5 (Macintosh: April 2001, Windows available upon request)
- region profile for Portugal added
- fixed OK button behaviour in New Session screen
- various report enhancements
- small bugs fixed in Report to Bookkeeper
- preference added to defeat all birthday messages
- employee security profile additions
- retainer jobs now on due date order list
- longer employee first names
- various small fixes to large lists
- time charges no longer round off
- new report: Current Users Report shows who is online on a network
- First Aid now tells you how many users are logged on
- preferred vendor bug in suggested charge fixed
- timer charges now cleverer for people working overnight shifts
- Macintosh: many small fixes (hyphens no longer on job ticket screen, some fields that were missing are fixed

Release 7B5 ( January 2001)
- significant improvements to profiles for UK, Ireland, and France
- addition of profiles for Netherlands, Guam, and Hong Kong
- for other improvements, read our upgrade page.

Version 6:

Release 6B12 (April 1999)
- region profile for Norway added
- problems with archiving command fixed
- slight refinements to new alteration rounds system introduced in 6A3
- Windows: fix to allow TimeWise to run properly on some CPUs with speeds of 300MHz or faster

Release 6B8 (October 1998)
- Macintosh: problem with Client Sales Report printing off the right hand edge on some printers fixed
- Macintosh: "Position Off Screen" crash in Setup | Forms | Invoices and Proposals with some flavours of Courier font fixed
- international editions: wording errors and width of printed task categories list fixed
- Windows: enhancement offering choice of automatically updating Preferred Vendor when saving item charges

Release 6B7 (September 1998)
- problem with double menus occasionally appearing fixed
- problem with vendor delivery zone not always remembered fixed
- some problems with Group Charge command fixed
- timesheet default logic improved
- Macintosh: problem with interface suggesting you can select commands not currently available fixed
- Macintosh: Load command fixed
- Macintosh: a number of other small problem fixes and interface improvements

Release 6B6 (September 1998)
- region profile for Colombia added
- bug in task category selection when editing existing item charges fixed
- bug in selecting one client in Client Sales Report fixed
- bug in job ticket when editing Delivery Instructions fixed
- a number of small interface improvements
- 30-day trial: now includes multiuser option
- Windows: setup template added for accounting firms
- Windows: bug fixed in new installer when installing both setup template and sample information
- Macintosh: improvements to Australian profile

Release 6B3 (July 1998)
- Windows: new installer with state-of-the-art uninstall for all Windows platforms
- Macintosh: corrections to fax and other auxiliary formats for some international regions
- Macintosh: corrections to international wording for some international regions

Release 6B2 (July 1998)
- more improvements to job ticket preferences
- cleverer defaults in alteration rounds
- separate help for Windows and Mac users on cross-platform installations
- fixes problem when selecting only one client in Client Sales Report
- region profiles for Namibia and Botswana added

Release 6B1 (June 1998)
- speed improvement in Time Charge, Item Charge commands, and elsewhere

Release 6A3 (May 1998)
- Year 2000-compatible interface (all data was already Year 2000-compatible)
- various improvements for Australia
- fixes international date format for many countries outside North America
- improved printed job ticket appearance
- more flexibility in job ticket preferences, including two customizable fields
- up to 99 alteration rounds
- enhanced round system, with each round having title, in date, and due date
- Completed Jobs Report now includes reporting on missed deadlines
- fixes bug in Work In Progress Report
- Status Report includes comprehensive reporting on alteration round activity
- new report help you issue memos to client regarding archived job storage
- many small screen appearance improvements and small fixes
-

Version 5

Release 5M1 beta
- fixes problem with double spacing of printed invoices and purchase orders on some printers
- various improvements for Australia

Release 5L6 (February '98)
- fixes sales tax rate bug introduced in beta 5L4
- various improvements for New Zealand

Release 5L4 (January '98)
- international version of help file now included (you must download the entire product to get this file... the updater does not include it)
- TimeWise for Macintosh includes Mac-specific help file
- various small fixes (security levels, Variable not found...)

Release 5L3 (January '98)
- Profiles for many international regions added
- Purchase orders, check requests, and insertion orders can now be more than one page long
- "File LOGOFF not found" intermittent error message when running two TimeWise sessions at once on one CPU fixed (only an issue on Windows)
- various small fixes

Release 5K7 (September '97)
- now up to 99 copies of a job ticket can be printed at once
- now up to 99 copies of job lists can be printed at once
- "Position Is Off The Screen" error message when invoicing fixed (only an issue on Macintosh)

Release 5K6 (August '97)
- addition of Tutorial Mode to TimeWise Light (Windows only)
- addition of option to allow users to design their own job ticket (undocumented, contact us for details)

Release 5K5 (July '97)
- possible appearance of Menu Manager Internal Consistency Error fixed (only an issue in Windows)
- font problems on Tutorial Mode for some Macintosh computers fixed (Mac only)

Release 5K4 (June '97)
- addition of Tutorial Mode to Help menu, to help new users learn how to use TimeWise (not in Light)
- possible appearance of Internal Consistency Error when generating purchase order fixed (only an issue in Windows)
- possible appearance of asterisks on Billable List fixed

Release 5K3 (June '97)
- Bug that could cause Billable Jobs List to intermittently include extra jobs fixed

Release 5K2 (June '97)
- It is now possible to name a font size of your choice to use in invoices. For details read the Invoice topic in the F1 Help.

Release 5K1 (May '97):
- Client Mailing Labels/Envelopes now allows you to choose to only include labels for clients with jobs or estimates within a date range of your choice. This is intended to make it easy to do a mailing to clients who have been recently active. (feature not available in Light)
- It is now possible to name a font of your choice to use in invoices (though if you choose a proportionately-spaced font, the right column must be aligned manually). For details read the Invoice topic in the F1 Help.
- Problems with the Reuse button in Item Charge and Time Charge have been fixed.
- Problems with the contact field on job tickets fixed
- PST/SST exemption number field now Year 2000-compliant

Questions, comments, or problems? Contact info@timewise.net, or call (613) 728-6777.

Copyright © 1995-2008 David Berman Developments Inc. Certain names, logos, designs, titles, words or phrases on this page may constitute trademarks, servicemarks, or tradenames of other entities which may be registered in certain jurisdictions.

Reviewed August 2008